Cable tester Noyafa RJ-45, RJ-12, RJ-11 + PoE + with tone generator (NF-8209)

Network cable PoE tester (NF-8209). Features: The network cable tester NF-8209 is a new generation device that combines analog, digital and PoE (Power over Ethernet) modes of operation. It consists of a transmitter, a receiver and a remote sensor. LED and sound indicators are used to visually display the status of the device. The built-in flashlight will facilitate work in conditions of insufficient lighting. The bright LCD screen displays parameters, circuits and modes of operation. Testing of STP, UTP cable. Cable length determination, cable joint and communication line analysis. For use with IEEE 802.3af/at and non-standard PoE devices. The receiver has a built-in DC and AC voltage meter. Features: Cable length measurement: CAT-5E, CAT-6, CAT-6A (STP/UTP), detection range: 2.5 ~ 200m. Ethernet cable integrity scan to detect various faults such as: short short circuit, wire break, lack of uncompressed pairs, etc., analysis of cable connections and communication lines, determination of the location of damage. PoE testing: Connecting the device to a POE source allows you to evaluate equipment parameters (power polarity, power mode, PSE type indicators). Flash function: connected port/cable search: the ability to detect the port to which one side of the cable is connected. When searching for a connected cable, the tester generates a signal propagated through the cable. Network speed and protocol indicators appear on the screen. Testing of wiring and twisted pair wiring diagram: CAT5e/CAT6a/CAT6 (STP + UTP). Main characteristics: Maximum cable scanning distance (detection of wiring card): 600m. Power battery type: DC 9V 6R22 battery, (not included) and AAA batteries x3, 1.5V (not included). Range cable length detection: 2.5 ~ 200m. Accuracy: +/- 1.6m. Frequency: 130 kHz. Output signal level: 9±1V, peak-peak amplitude. Damage location detection: yes. Analog/digital signal scanning: yes. PoE (Power over Ethernet) equipment power supply type: DC 5-60V standard / non-standard PoE. PoE voltage indicator: Yes. Types of equipment tested: IEEE 802.3af and IEEE 802.3at standard equipment copper port testing. Surge protection: DC 48V/5mA. Display: LCD, 128x64mm, bright backlight. Maximum operating current: <150mA. Adjustable sensitivity: yes. Maximum receiver operating current: <100 mA. Remote sensor interface: RJ45. Overall dimensions: Transmitter: 125 x 68 x 28 mm. Receiver: 210 x 43 x 27 mm. Remote sensor: 65 x 37 x 23 mm. Complete set: Transmitter. Sensor. Receiver. Operating instructions and warranty card. Set of adapters cable. Headphones. Bag-cover.

Characteristics

Manufacturer

Noyafa

Country of manufacture

Китай

Types of tested cables

RJ-45

Loading...