Thermoregulator Nexans Millitemp 2 BREATH (000019248)

Name: Thermoregulator Nexans Millitemp 2 BREATH (000019248)
SKU: 000019248
Availability: OutOfStock

Out of stock

0 ₴

NEXANS MILLITEMP 2 is a beautiful and modern temperature controller with a touch screen, which is a spectacular and important component of the electric cable system of Nexans warm floors.

The thermostat can be programmed to automatically adjust the heating according to either the air temperature in the room or the floor temperature. It can be set to maintain a constant temperature (set by the user) or be used according to a "day/night" energy saving program.

In this way, it is possible to automatically reduce energy consumption at night and in those hours of the day when the user does not need increased heating.

Electricity consumption can be significantly reduced with a 7-day programming scheme, where each day is additionally divided into four intervals. It is also possible to program the complete shutdown of the device for a certain period, whether it is a one-time event or a recurring (every day) event.

The MILLITEMP 2 thermostat has a built-in room temperature sensor and is equipped with an external sensor, which, when used, must be placed in the floor (placed in the floor) between two loops of the heating cable next to the floor surface. Thanks to this, three operating modes are available:

Indoor temperature control using the built-in sensor (external sensor is not used) Regulation of floor temperature using an external sensor Indoor temperature control with a built-in sensor COMMON with temperature limitation with an external sensor.

The MILLITEMP 2 thermostat has a CE mark and fully meets the requirements of EU standards directives.

Intended for indoor use only.

Rated voltage: 230 V AC, 50 Hz

Maximum load: 16 A

Temperature setting range: 5-35°C

Temperature measurement range: 0-55°C

Accuracy of temperature adjustment: ± 1°C

Functional buttons: touch screen

Terminals for connection: connecting a wire with a cross section of no more than 2.5 mm2

Body: fire-resistant plastic PC+ABS

Dimensions: 86×86×15.8 mm

COMPLECATION