Stabilizer Elex Ampere U 12-1/10 v2.0 (U 36-3/100 v3.0)

Three-phase voltage stabilizer HERTZ-PRO U 36-3/100 v3.0 is designed for operation in electrical networks with voltage fluctuations from 150 to 260V. In this range, the device is guaranteed to output voltage within 220±1%, which is ensured by using 36 levels of stabilization, respectively. The Hertz-PRO model range can be 66, 83, and 106 kW, which corresponds to an operating current of 100, 125, and 160 A per phase.

The features of this stabilizer include a double LED indicator per phase, a linear loading strip, the presence of a mechanical transit (bypass), a floor design, the presence of input and output filters to protect against high-frequency interference, silent operation due to the use of toroidal transformers and thyristor switches.

If it is necessary to obtain a voltage other than 220V in Hertz at the output of the stabilizer, there is a function of adjusting this value in the range of 200-230V. In manual mode, you can change the output voltage in steps of 1V. At the same time, the changes will be applied simultaneously to all phases.

The Hertz stabilizer has the ability to manually adjust the lower cut-off threshold (60-135V). This function is required for loads with high starting currents, when starting which a strong voltage drop and emergency disconnection of the stabilizer are possible. When this option is activated, the stabilizer will make it possible to start any engine or pump within a minute, even if the voltage drops to 60V in the network.

The built-in phase synchronization mode will allow you to instantly turn off the three-phase load, protecting it from voltage interruptions and loss of power on phases (one or two). This function has manual control and can therefore be disabled at any time. In this case, the phases will work independently of each other.

It is recommended to install and operate the HERTZ-PRO U 36-3/100 v3.0 stabilizer in dry and heated rooms. This device is intended for floor installation. The connection is made to the existing wiring through a terminal block.

Characteristics of voltage stabilizers

Manufacturer

Елекс

Installation method

напольный

weight

245 кг

Country of manufacture

Украина

Warranty, month

36

Display of input/output voltage values

цифровой индикатор

Size, mm

1280 х 384 х 779 мм

Connection to a 220V network

клеммная колодка

Stabilization accuracy

+/- 1%

Maximum input voltage, V

280 В

Minimum input voltage, V

100V

Power, VA

66000 VA

Power, W

66 000 Вт

type

тиристорный

Article

У 36-3/100 v3.0

Model

Герц-ПРО У 36-3/100 v3.0

Loading...