Stabilizer Elex Ampere U 12-1/10 v2.0 (U 12-3/80 v2.0)

Three-phase voltage stabilizer Ampere U 12-3 / 80 v2.0 is designed for operation in three-phase electrical networks with voltage fluctuations from 145 to 275V. In this range, the device is guaranteed to output voltage within 220 ± 3.5%, which is ensured by using 12 levels of stabilization. The total nominal power of this model is 53 kW (18 kW per phase), which corresponds to the operating current of the circuit breaker of 80 A on it.

Features of this stabilizer include floor design, independent operation of each phase, presence of electronic transit (bypass), silent operation due to the use of thyristors as power switches.

Stabilizer Ampere U 12-3 / 80 v2.0 has the possibility of manual adjustment of the lower cut-off threshold (60-135V). This function is required for loads with high starting currents, when starting which a strong voltage drop and emergency disconnection of the stabilizer are possible. When this option is activated, the stabilizer will make it possible to start any engine or pump within a minute, even when the voltage drops to 60V in the network.

It is recommended to install and operate the Ampere U 12-3 / 80 v2.0 stabilizer in dry and heated rooms. The connection is made to the existing wiring through the terminal block, which is located in the upper part of the case under the cover.

Characteristics of voltage stabilizers

Protection from

повышенное напряжение

Display of input/output voltage values

цифровой индикатор

Article

У 12-3/80 v2.0

type

тиристорный

Power, VA

53000 VA

Country of manufacture

Украина

Warranty, month

24

weight

80 кг

Size, mm

810х520х325 мм

Power, W

53 000 Вт

Minimum input voltage, V

100V

Maximum input voltage, V

295 В

Stabilization accuracy

3.5%

Connection to a 220V network

клеммная колодка

Phase

трехфазный

Installation method

напольный

Manufacturer

Елекс

Model

Ампер У 12-3/63 v2.0

Loading...