Stabilizer Elex Ampere U 12-1/10 v2.0 (U 12-1/63 v2.0)

Single-phase voltage stabilizer AMPERE U 12-1 / 63 v2.0 (standard) is designed for operation in electrical networks with voltage fluctuations from 145 to 275V. In this range, the device is guaranteed to output a voltage within 220 ± 3.5%, which is ensured by using 12 levels of stabilization.

The model range of all the listed amps can be 2.2, 3.5, 5.5, 7, 9, 11, 14 and 18 kW, which corresponds to an operating current of 10, 16, 25, 32, 40, 50, 63 and 80A, respectively.

The features of this stabilizer include silent operation due to the use of triacs (thyristors) as power switches and the presence of electronic transit (bypass).

The 12-step Ampere stabilizer has the ability to manually adjust the lower cut-off threshold (60-135V). This function is required for loads with high starting currents, when starting which a strong voltage drop and emergency disconnection of the stabilizer are possible. When this option is activated, the stabilizer will make it possible to start any engine or pump within a minute, even when the voltage drops to 60V in the network.

It is recommended to install and operate the stabilizer AMPER U 12-1 / 63 v2.0 in dry and heated rooms. The wall installation is recommended to be carried out in a vertical position (fans facing upwards), leaving 10-15 cm above and below for cooling. The connection is made to the existing wiring through a terminal block.

Characteristics of voltage stabilizers

Size, mm

530х295х175 мм

Country of manufacture

Украина

weight

26 кг

Warranty, month

24

Manufacturer

Елекс

Model

Ампер У 12-1/63 v2.0

Power, W

14 000 Вт

Article

У 12-1/63 v2.0

Installation method

настенный

Connection to a 220V network

клеммная колодка

Protection from

скачки напряжения

Phase

однофазный

Power, VA

14000 VA

Stabilization accuracy

3.5%

Maximum input voltage, V

295 В

Minimum input voltage, V

100V

Display of input/output voltage values

цифровой индикатор

Loading...