Stabilizer Elex Ampere U 12-1/10 v2.0 (U 16-1/80 v2.0)

Single-phase voltage stabilizer AMPER-T U 16-1 / 80 v2.0 (accurate) is intended for operation in electrical networks with voltage fluctuations from 145 to 275V. In this range, the device is guaranteed to output a voltage of 220 ± 2.7%, which is ensured by using 16 levels of stabilization.

The model range of all the listed amps can be 5.5, 7, 9, 11, 14 and 18 kW, which corresponds to an operating current of 25, 32, 40, 50, 63 and 80A, respectively.

The features of this stabilizer include silent operation due to the use of triacs (thyristors) as power switches and the presence of electronic transit (bypass).

The Ampere stabilizer for 12 and 16 steps has the possibility of manual adjustment of the lower cut-off threshold (60-135V). This function is required for loads with high starting currents, when starting which a strong voltage drop and emergency disconnection of the stabilizer are possible. When this option is activated, the stabilizer will make it possible to start any engine or pump within a minute, even when the voltage drops to 60V in the network.

It is recommended to install and operate the AMPER-T U 16-1 / 80 v2.0 stabilizer in dry and heated rooms. The wall installation is recommended to be carried out in a vertical position (fans facing upwards), leaving 10-15 cm above and below for cooling. The connection is made to the existing wiring through a terminal block.

Characteristics of voltage stabilizers

Protection from

повышенное напряжение

Phase

однофазный

Installation method

настенный

Connection to a 220V network

клеммная колодка

Warranty, month

24

weight

30 кг

Country of manufacture

Украина

Size, mm

530х295х175 мм

Display of input/output voltage values

LCD дисплей

Article

У 16-1/80 v2.0

Power, W

18 000 Вт

type

тиристорный

Power, VA

18000 VA

Minimum input voltage, V

100V

Maximum input voltage, V

295 В

Stabilization accuracy

2.7%

Model

Ампер-Т У 16-1/80 v2.0

Manufacturer

Елекс

Loading...