Stabilizer Elex Amper-R U 16-1/40 v2.1 (U.16-1/40 v2.1)

Single-phase voltage stabilizer AMPER-R U 16-1 / 40 v2.0 (extended) is designed for operation in electrical networks with voltage fluctuations from 120 to 275V. In this range, the device is guaranteed to output a voltage of 220 ± 3.5%, which is ensured by the use of 16 levels of stabilization.

The model range of all the listed amps can be 5.5, 7, 9, 11, 14 and 18 kW, which corresponds to an operating current of 25, 32, 40, 50, 63 and 80A respectively.

The features of this stabilizer include silent operation due to the use of triacs (thyristors) as power switches and the presence of electronic transit (bypass).

The 16-step Ampere stabilizer has the ability to manually adjust the lower cut-off threshold (60-135V). This function is required for loads with high starting currents, when starting which a strong voltage drop and emergency disconnection of the stabilizer are possible. When this option is activated, the stabilizer will allow you to start any engine or pump within a minute, even if the voltage drops to 60V in the network.

It is recommended to install and operate the AMPER-R U 16-1 / 40 v2.0 stabilizer in dry and heated rooms. The wall installation is recommended to be carried out in a vertical position (fans facing upwards), leaving 10-15 cm above and below for cooling. The connection is made to the existing wiring through a terminal block.

Characteristics of voltage stabilizers

Display of input/output voltage values

LCD дисплей

Connection to a 220V network

клеммная колодка

Phase

однофазный

Protection from

повышенное напряжение

Minimum input voltage, V

90 В

Maximum input voltage, V

295 В

Stabilization accuracy

3.5%

Warranty, month

24

Manufacturer

Елекс

Model

Ампер-Р У 16-1/40 v2.1

Article

У.16-1/40 v2.1

Country of manufacture

Украина

Installation method

настенный

Power, W

9000 Вт

Power, VA

9000 VA

weight

25 кг

Size, mm

530х295х175 мм

Loading...