Stabilizer Elex Ampere U 12-1/10 v2.0 (U.16-1/32 v2.0)

Single-phase voltage stabilizer AMPER-R U 16-1 / 32 v2.0 (extended) is designed for operation in electrical networks with voltage fluctuations from 120 to 275V. In this range, the device is guaranteed to output a voltage of 220 ± 3.5%, which is ensured by using 16 levels of stabilization.

The model range of all the listed amps can be 5.5, 7, 9, 11, 14 and 18 kW, which corresponds to an operating current of 25, 32, 40, 50, 63 and 80A, respectively.

The features of this stabilizer include silent operation due to the use of triacs (thyristors) as power switches and the presence of electronic transit (bypass).

The 16-step Ampere stabilizer has the possibility of manual adjustment of the lower cut-off threshold (60-135V). This function is required for loads with high starting currents, when starting which a strong voltage drop and emergency disconnection of the stabilizer are possible. When this option is activated, the stabilizer will make it possible to start any engine or pump within a minute, even when the voltage drops to 60V in the network.

It is recommended to install and operate the AMPER-R U 16-1 / 32 v2.0 stabilizer in dry and heated rooms. The wall installation is recommended to be carried out in a vertical position (fans facing upwards), leaving 10-15 cm above and below for cooling. The connection is made to the existing wiring through a terminal block.

Characteristics of voltage stabilizers

Connection to a 220V network

клеммная колодка

Display of input/output voltage values

LCD дисплей

Article

У.16-1/32 v2.0

Warranty, month

24

Size, mm

460х275х175 мм

weight

25 кг

Country of manufacture

Украина

Protection from

повышенное напряжение

Installation method

настенный

Power, W

7000 Вт

Phase

однофазный

Power, VA

7000 VA

Minimum input voltage, V

90 В

Maximum input voltage, V

295 В

Stabilization accuracy

3.5%

Model

Ампер-Р У 16-1/32 v2.0

Manufacturer

Елекс

Loading...