Cooler for the case Zezzio ZS-120 Sky Star ARGB 3 in 1 Kit

Unique design with starlight effect
New, stylish, unique design with starlight effect. 18 controllable super bright ARGB LEDs are located in the outer light ring of the fan housing, which are directed at the translucent impeller blades, creating a starlight effect. Master the unique lighting effects of the fan glow and control them using the software on the motherboard or the wireless remote that comes with the kit. You can also separately connect the control of lighting effects to the Reset button of the case or to the LED button, if it is in the case.

Unique heat dissipation design
The nine blades of the impeller of each fan have a sharp angle of attack. The fan blades have unique aerodynamic properties, they quickly and silently cut the air. At a maximum speed of 1800 rpm, each fan produces a large airflow of 54 cubic feet per minute (CFM), effectively dissipates heat, and does not create vibration.

Vibration protection
Each fan is equipped with silicone cushions on each side, which significantly reduce fan vibration noise at high impeller speeds. When using this technology, the fan easily adapts to different rotation scenarios and effectively improves the air flow.

Hydrodynamic bearing
ZS-120 series fans use the technology of high-performance sealed hydrodynamic bearing, which contain a lot of lubricant with the possibility of its circulation on the friction surface. The use of this technology effectively reduces bearing wear and reduces fan noise. The service life of the bearing can reach more than 30,000 hours, and the noise level is below 31.1 dBa.

Wide range of applications
The fans can be used for 120/240/360mm water cooling radiators as a CPU cooler, a graphics accelerator radiator and of course as a unique cooling system for a computer case. The fans are equipped with a special connector that combines lighting and fan speed control. The fans are connected to the hub that comes with the set. You can control the rotation of the fans in automatic mode, using the wired sensor from the kit, using manual mode, using the functions of the wireless remote control, and using the software settings of the motherboard.

Characteristics Fans for cases

Model

ZS-120 Sky Star ARGB 3 in 1 Kit

Mean time to failure (MTBF)

30000 ч

Current consumption

0.27 А

weight

350 г

Size

120 х 120 х 25 мм

Manufacturer

Zezzio

Fan supply voltage

12 В

Air flow

54 CFM

Noise level

31 дБ

Illumination

разноцветная

Number of fans

3

Fan diameter

120 мм

Bearing type

FDB Bearing (гидродинамический)

Color

черный

Warranty, month

12

Country of manufacture

Китай

Maximum rotation speed

1800RPM

Type of connection connector

6-pin

Article

ZS-120 Sky Star ARGB 3 in 1 Kit

Loading...