Cooler for the case ThermalTake Riing 12 LED RGB 256 Colors Fan (set of 3) (CL-F042-PL12SW-B)

The Riing RGB series is an advanced version of the Riing series fans. Unlike the traditional Riing, the RGB version is equipped with an additional controller, through which you can control the speed of the fan and choose the desired color of the backlight or turn on the mode in which the colors of the backlight will shimmer. The special shape of the blades makes it possible to create high air pressure at a low noise level. To further minimize the noise level, high-quality hydraulic bearings and anti-vibration fasteners are used.

The patented design of the luminous ring with LED backlight will give a special style to your PC. A special Tt LCS certificate of conformity is awarded only to Thermaltake products that meet the highest requirements for design, ergonomics and cooling quality. The presence of the Tt LCS certificate means that the product is ready to work in a liquid cooling system, from the entry level (all-in-one systems) to complex component systems (all components are purchased separately at the discretion of the user).

Products with the Tt LCS certificate are the choice of a true enthusiast. The patented design of the luminous ring with LED illumination will give a special style to your PC. Now your computer will shine and look stylish from any angle. By means of a special controller, you can choose the desired color of the backlight or turn on the mode in which the colors of the backlight will shimmer. If desired, the backlight can be turned off altogether. The selected backlight mode will remain in the controller's memory until the PC is restarted. Also, the controller allows you to reduce the speed of rotation of the fan blades and lower the noise level. The special shape of the blades of the Riing series fans helps to concentrate the entire air flow closer to the edge, which allows to increase the air pressure, which is very relevant for SVO radiators.

For additional cooling optimization, there is a special protrusion on the inside of the fan frame that allows to direct part of the air flow into the middle of the fan. This allows you to avoid partial outflow of air from the edges of the fan and to achieve a minimum level of aerodynamic noise. High-quality hydraulic bearings are used in Riing series fans to minimize the noise level and increase the service life. In order to avoid leakage of lubricating fluid, oil seals are installed on both sides, which also protect against the ingress of dust and other dirt. To reduce the speed of the fan, simply press the "SPEED" button on the controller, and the noise level will decrease by 32%. Thanks to specially built-in rubber fasteners, the overall level of vibration has decreased by 80%.

Characteristics Fans for cases

Size

120 х 120 х 25 мм

Warranty, month

12

Color

черный

Country of manufacture

Китай

weight

161 г

Number of fans

3

Manufacturer

ThermalTake

Bearing type

FDB Bearing (гидродинамический)

Article

CL-F042-PL12SW-B

Illumination

разноцветная

Maximum rotation speed

1500RPM

Nominal rotation speed

800RPM

Fan diameter

120 мм

Fan supply voltage

12 В

Mean time to failure (MTBF)

40000 ч

Current consumption

0.21 A

Power consumption

2.52 Вт

Rotation speed control

есть

Pressure

2.01 мм H2O

Air flow

40.6 CFM

Noise level

26.4 дБ

Model

Riing 12 LED RGB 256 Colors Fan (комплект из 3-х)

Type of connection connector

4-pin

Loading...