Dahua DH-PFS4206-4P-96 network switch

The main task of PoE switches is to remotely supply power to network devices. Connection to the switch is possible using a standard cable up to 100 meters long - twisted pair of the fifth or sixth category. Power and data are supplied synchronously through the network cable.

To form a network in an office or enterprise, you will need a two-level controlled PoE switch with four ports Dahua DH-PFS4206-4P-120. This switch supports STP and RSTP network protocols for WEB and SNMP V1/V2C management. With high-quality characteristics, the switch perfectly powers four network devices that support power standards via Hi-PoE IEEE802.3af or IEEE802.3at. The total power consumption is 120W, where less than 30W falls on each channel 1-3 and less than 60W on channel 4.

Features:

Two-level industrial switch Automatic MAC address scanning and aging, 8K MAC address list capacity Support for private ring network, recovery time <= 50ms Support for IEEE802.3af, IEEE802.3at, Hi-PoE standards Wide temperature range PoE power management

Characteristics Switches

Form factor

настольный/в стойку

Number of ports

4

PoE requirements

PoE 802.3at (PSE) до 30 Вт на порт

Forwarding speed of 64-byte packets

4.91 Mpps

Warranty, month

12

Country of manufacture

Китай

Number of WAN ports

1x10/100/1000 Base-T (Hi-PoE / PoE+ / PoE), 3x10/100 Base-T (PoE+ / PoE )

Number of Uplinks ports

2x1G SFP

height

30 мм

weight

0.48 кг

Width

100 мм

Power supply unit

внешний

Humidity range (operation)

от 10% до 90% без конденсата

type

управляемый

Working temperature

от -30˚ до 65˚ C

Management

SNMP V1/V2C

Packet buffer

1 Мб

The size of the MAC address table

8 Кб

Ports

Gigabit Ethernet

Possibility of remote control

управляемый

Switching capacity

6.8 Гбит/с

Model

DH-PFS4206-4P-96

Article

DH-PFS4206-4P-96

Manufacturer

Dahua

Loading...