Network switch D-Link DGS-1210-28/ME/P/B
0 ₴
Management features include SNMP, Web-based management, SmartConsole utility, and Compact Command Lines. Switches of this series also support functions such as ACL filtering and D-Link Safeguard Engine. Moreover, the DGS-1210 series switches support the Auto Voice VLAN function, providing maximum priority for “voice traffic. DGS-1210 is made in a metal case for installation in a 19-inch rack, equipped with an innovative passive cooling system.
D-Link Green technology
The D-Link company occupies a leading position in the development of innovative energy-saving technology, which does not reduce the performance and functionality of the device. The technology provides for an automatic change in the level of the transmitted signal depending on the length of the connected cables (up to 20 meters). The use of Green Ethernet technology allows the switch to obtain information about their activity by polling the status of the ports and, if necessary, automatically disable inactive ports.
Flexible integration into the existing network
The DGS-1210 series switches are equipped with Gigabit Ethernet copper ports that provide connectivity over existing Category 5 twisted-pair cabling. Each switch is equipped with two or four SFP combo ports for flexible optical connection to trunks and servers. With the help of the preliminary settings wizard, the administrator can quickly make preliminary settings on the switch.
Advanced level 2 functions
DGS-1210 switches support a number of Layer 2 features, including IGMP Snooping, Port Mirroring, Spanning Tree, and Link Aggregation Control Protocol (LACP). IEEE 802.3 x flow control allows you to directly connect servers to the switch for fast and reliable data transfer. Supporting a speed of 2000 Mbit/s in full duplex mode, the switch provides high transmission speed for connecting workplaces with minimal data loss. The switches support the cable diagnostics function and the Loopback Detection function. The Loopback Detection function is used to detect loops and automatically disable the port on which the loopback is detected. The cable diagnostic function is designed to determine the types of copper cables, as well as the type of cable fault.
Characteristics Switches
- Transmission method
- Store-and-Forward (хранение и передача)
- Data transfer medium
- 100BASE-TX/1000Base-T: неэкранированная витая пара категорий 5
- Number of 1000TX ports
- 24x10/100/1000TX
- Warranty, month
- 12
- Manufacturer
- D-Link
- Compliance with network standards
- IEEE 802.3ad (агрегация каналов)
- QoS (data prioritization)
- строгий приоритет
- Virtual networks
- 802.1v Protocol VLAN
- Safety
- DHCP Server Screening
- L2 and L2+ functions
- агрегирование каналов
- Management
- Trap/alarm/log severity control
- Certification
- BSMI
- Humidity range (operation)
- от 10% до 90% без конденсата
- weight
- 2.2 кг
- Body
- Металический
- Number of 1000FX ports
- 4хSFP
- Country of manufacture
- Тайвань
- Auto-detection of MDI/MDIX
- есть
- Support of transport protocols
- IPv6
- Ports
- Gigabit Ethernet
- Number of ports
- 29
- Form factor
- в стойку
- type
- управляемый 2-го уровня
- Article
- DGS-1210-28/ME/P/B
- Model
- DGS-1210-28/ME/P/B
- Forwarding speed of 64-byte packets
- 41.7 Mpps
- Switching capacity
- 56 Гбит/с
- Possibility of remote control
- управляемый
- Flash memory
- 32 Мб
- Packet buffer
- 1.5 Мб
- Working temperature
- от -5˚ до 50˚ C
- Jumbo frame
- 9216 байт
- The size of the MAC address table
- 16000 Кб
- The depth
- 140 мм
- height
- 44 мм
- Width
- 440 мм
- The question
- 100-240 В
- Power consumption (maximum)
- 19.1 Вт
- Storage temperature
- от -40˚ до 70˚ C
Loading...
